ECS Black Series GF200A

ECS Black Series motherboard GF200A not difficult to install. It is not as complex as any other turn out to be. The board has a good layout memory slots and add the card as well. You can directly turn off and on the motherboard and reboot the system with too many switches. This is something I used to.

North Bridge chip tends to be a little vruće.Mjesto can be better, but it's not the end of the world. I used the Radeon HD series graphics card with this motherboard and it is snug against the North Bridge, and that's why I'm kind of unnerved by location in the north of bridge.

Now May positioning video card means that you can not put a fan on top of North Bridge, but it will depend if you use a graphics card or not. When you turn on the motherboard for the first time, be aware that the CMOS jumper is on by default in a clear position to want to make sure to set this accordingly.

Some people have reported that the BIOS was originally set to AHCI for formatting the drive and it can definitely make the problem if it does not change the SATA. After a few minor problems like this, it is worth the time and effort involved. Also, the software disc that came with the motherboard will not work if you have 32-bit operating system installed.

There is a very good price and performance ratio in connection with this motherboard. If you can get around the strange thing is actually not much wrong with ECS Black Series GF8200A. It should be noted that it comes with a GeForce 8200 HDMI video onboard.